Custom Chamfer Cutters – Tipped Off

Custom Chamfer Cutters Reference

Chamfer Angle: Select a fixed angle according to your drawing requirements.

Diameter and Number of Flutes:

• Diameter: Typically 1.5-2 times the chamfer width (e.g., for a 3mm chamfer width, select a tool with a diameter of 4.5-6mm).
• Number of Flutes: For rough machining, choose 2-3 flutes; for finishing, choose 3-4 flutes.

Recommended Cutting Parameters:

• Spindle Speed (S):
  • Aluminum Alloy: 2000-4000 rpm
  • Steel/Cast Iron: 500-1500 rpm
  • Titanium Alloy: 300-800 rpm
• Feed Rate (F): 0.05-0.3 mm/tooth (use smaller values for harder materials).
• Axial Depth of Cut (ap): Single feed ≤1mm (use multiple passes to avoid overloading).