Custom Double Ended Chamfer Cutter
Double ended chamfer cutters can create different cutting angles, allowing for multiple applications with a single tool. ZLY can design chamfering tools with a variety of angles to meet your specific needs.
Custom Chamfer Cutter Reference
Chamfer Angle: Select a fixed angle according to your drawing requirements.
Diameter and Number of Flutes:
- Diameter: Typically 1.5-2 times the chamfer width (e.g., for a 3mm chamfer width, select a tool with a diameter of 4.5-6mm).
- Number of Flutes: For rough machining, choose 2-3 flutes; for finishing, choose 3-4 flutes.
Recommended Cutting Parameters:
- Spindle Speed (S):
- Aluminum Alloy: 2000-4000 rpm
- Steel/Cast Iron: 500-1500 rpm
- Titanium Alloy: 300-800 rpm
- Feed Rate (F): 0.05-0.3 mm/tooth (use smaller values for harder materials).
- Axial Depth of Cut (ap): Single feed ≤1mm (use multiple passes to avoid overloading).
